
BABSI FLASHES FREE RIDER
A film documenting the first flash ascent of El Capitan by BD Athletes Babsi Zangerl...
Add $99.00 more to quality for free Shipping!
$0.00 USD
Whether it's at the local gym or a dreamy vacation cliff in the Mediterranean, we've all been there: You finish a sport climb and are ready to clip your rope through the anchors (e.g., cold shuts, leaver biners, chain links, etc.) when you notice that countless lowerings and top roping have left gnarly rope grooves in the anchors. Will these grooved-out anchors hold? Will the sharp edges trash my rope?
Recently a friend of mine was doing his part at a local sport crag by replacing old bolts and rope-grooved anchors. He pulled these off and wanted me to test them to see how weak they were. (I'm not going to get into the technicalities, pluses or minuses of different kinds of anchors and am not condoning anything in anyway—I'm just looking at only one style of cold shut, one test, two data points, just out of curiosity more than anything.)
I've tested (well, I don't actually test anything, but I have a crack team of engineers that perform the testing) many rope-grooved carabiners before and had a sneaky suspicion what I'd see. I had never actually tested cold shuts, however, so I thought I'd have the QA engineers here at BD test these old ones and compare them to a new one.
Tests
Measuring the rope groove of the test samples, the reduction in thickness was about 25%. Therefore… the used cold shuts would be 25% weaker, right? Wrong.
The rope groove forces the rope to stay in line with the main axis and direction of load of the cold shut, whereas with a new cold shut, as the load increases, the rope is able to slide out and cantilevers it open at a reduced load. So rather than reduce the tensile strength of the shut due to removal of material, the groove seats the rope onto the spine so that the shut holds more weight before it starts to deform.
Conclusions/Comments/Remarks
Just because a rope-grooved anchor may be stronger, however, doesn't make it better. The sharp edges of rope-grooved anchors and biners can potentially damage the rope's sheath. If you see anchors or biners out in the field that look beat up, do your part and replace them. You can also use your own quickdraws or biners at anchors in order to save on wear and tear of the fixed anchors.
Be safe out there,
KP
Kolin Powick (KP) is a Mechanical Engineer hailing from Calgary, Canada. He has nearly 20 years of experience in the engineering field and has been Black Diamond's Director of Global Quality since 2002. Kolin oversees the testing of all of Black Diamond's gear from the prototype phase through continual final production random sample testing. If you have a technical question for KP, please email him at askkp@bdel.com and he will TRY to respond.
A film documenting the first flash ascent of El Capitan by BD Athletes Babsi Zangerl...
A film documenting the first flash ascent of El Capitan by BD Athletes Babsi Zangerl and Jacopo Larcher.
BD Athletes Babsi Zangerl and Jacopo Larcher share their story of climbing one of the...
BD Athletes Babsi Zangerl and Jacopo Larcher share their story of climbing one of the world’s most mythical trad routes.
BD Athletes Aaron Mulkey and Yannick Glatthard take the new Hydra into the backcountry of...
BD Athletes Aaron Mulkey and Yannick Glatthard take the new Hydra into the backcountry of Montana in search of steep ice and mixed climbing.
Follow Dorian Densmore and Mya Akins for a month-long, exploratory mission in the Chugach Mountains.
Two BD legends walk into the Valley. What happens next? Watch and see.
With ski season kicking off, the QA Lab crew dives deep into the world of...
With ski season kicking off, the QA Lab crew dives deep into the world of electromagnetic interference and how it can affect backcountry safety.
Light is right, but steel is real. So, when it comes to ice screws, what’s...
Light is right, but steel is real. So, when it comes to ice screws, what’s the deal? In this QC Lab, Will Gadd and Matt Berry thread their way to the source of truth when it comes to aluminum vs. steel ice screws.
She was many things—a Stonemaster, an outdoor industry visionary, a physicist. A rock dropped into...
She was many things—a Stonemaster, an outdoor industry visionary, a physicist. A rock dropped into a pond that created ripples, affecting many lives and generations of climbers. This is the story of our unsung hero, our co-founder.
Go ahead, take the whip. You’ve got a trucker bolt just below. But wait …...
Go ahead, take the whip. You’ve got a trucker bolt just below. But wait … you sure about that? In this Gear Myths, Kolin “KP” Powick shares a recent close call, which resulted in an exploration of safety protocol when it comes to sport climbing.
The QC Lab team is joined by IFMGA Mountain Guide Mark Smiley to discuss the...
The QC Lab team is joined by IFMGA Mountain Guide Mark Smiley to discuss the subtle art of building, testing, and using snow anchors.
Follow these expert pointers on how to properly build out your very first trad rack.
A look into the technology and construction of an essential tool for hiking and trail...
A look into the technology and construction of an essential tool for hiking and trail running.
Find out from the experts at Black Diamond, the tips to find the best rock...
Find out from the experts at Black Diamond, the tips to find the best rock climbing harness for you.