
BABSI FLASHES FREE RIDER
A film documenting the first flash ascent of El Capitan by BD Athletes Babsi Zangerl...
Add $99.00 more to quality for free Shipping!
$0.00 USD
Now that's one of the most loaded questions I've ever heard, because, of course, there is no real definitive answer. There are so many factors involved, including quality of the placements, quality of the rock or ice, materials available, etc. For the sake of the discussion, however, we narrowed it down to assuming two "perfect" bolt placements and using one equalized sling. My immediate answer was that such a set-up would be plenty strong for most climbing applications no matter which way you slice it, but any time you knot a sling it undoubtedly weakens it.
Remember I'm not a guide and don't pretend to be one, and I'm not suggesting which anchor equalizing method is better or worse. All I'm providing is some data based on a very few (i.e., one) data point for each scenario.
Testing My crack crew of QA engineers and I decided to check out the three most common equalizing methods using a single 48" runner: Sliding X, Sliding X with Knots, and Figure 8. Again, I'm not going to get into the merits or negatives of each situation (e.g., shock loading if one anchor placement blows, how "equalized" they actually are, etc). This is just an apples-to-apples strength comparison of the three configurations.
So what do these numbers mean?
A couple of things to remember:
Using a Sliding X anchor, our tensile tester couldn't even break it. Now that is BURLY. And both configurations with knots were more than 20 kN in ultimate strength. So just as we've seen in previous sling-on-sling girth hitch experiments, knotting slings, etc, knots reduce the ultimate strength by anywhere from 40-60% and the failure mode is always at the knot. However, even though that seems like a big reduction in strength (which it is) the bottom line is that the anchor is still plenty strong for most any typical climbing scenario thrown at it.
Climb safe —
KP
A film documenting the first flash ascent of El Capitan by BD Athletes Babsi Zangerl...
A film documenting the first flash ascent of El Capitan by BD Athletes Babsi Zangerl and Jacopo Larcher.
BD Athletes Babsi Zangerl and Jacopo Larcher share their story of climbing one of the...
BD Athletes Babsi Zangerl and Jacopo Larcher share their story of climbing one of the world’s most mythical trad routes.
BD Athletes Aaron Mulkey and Yannick Glatthard take the new Hydra into the backcountry of...
BD Athletes Aaron Mulkey and Yannick Glatthard take the new Hydra into the backcountry of Montana in search of steep ice and mixed climbing.
Follow Dorian Densmore and Mya Akins for a month-long, exploratory mission in the Chugach Mountains.
Two BD legends walk into the Valley. What happens next? Watch and see.
With ski season kicking off, the QA Lab crew dives deep into the world of...
With ski season kicking off, the QA Lab crew dives deep into the world of electromagnetic interference and how it can affect backcountry safety.
Light is right, but steel is real. So, when it comes to ice screws, what’s...
Light is right, but steel is real. So, when it comes to ice screws, what’s the deal? In this QC Lab, Will Gadd and Matt Berry thread their way to the source of truth when it comes to aluminum vs. steel ice screws.
She was many things—a Stonemaster, an outdoor industry visionary, a physicist. A rock dropped into...
She was many things—a Stonemaster, an outdoor industry visionary, a physicist. A rock dropped into a pond that created ripples, affecting many lives and generations of climbers. This is the story of our unsung hero, our co-founder.
Go ahead, take the whip. You’ve got a trucker bolt just below. But wait …...
Go ahead, take the whip. You’ve got a trucker bolt just below. But wait … you sure about that? In this Gear Myths, Kolin “KP” Powick shares a recent close call, which resulted in an exploration of safety protocol when it comes to sport climbing.
The QC Lab team is joined by IFMGA Mountain Guide Mark Smiley to discuss the...
The QC Lab team is joined by IFMGA Mountain Guide Mark Smiley to discuss the subtle art of building, testing, and using snow anchors.
Follow these expert pointers on how to properly build out your very first trad rack.
A look into the technology and construction of an essential tool for hiking and trail...
A look into the technology and construction of an essential tool for hiking and trail running.
Find out from the experts at Black Diamond, the tips to find the best rock...
Find out from the experts at Black Diamond, the tips to find the best rock climbing harness for you.